Imagine swimming in your own private oasis, surrounded by the stunning beauty of nature. The sun is shining and the water is perfectly clear. You feel a sense of peace and tranquility as you float weightlessly in the refreshing water. This is what swimming in an infinity pool is like.
What is an infinity pool?
An infinity pool, also known as a Negative Edge Pool or a Zero Edge Pool, is a type of swimming pool where the water appears to extend to the horizon. The water level is usually flush with the coping (the edge of the pool) and there is no visible overflow.
What’s the difference between infinity pools and regular pools?
Here are six key differences between infinity pools and regular pools:
- Infinity pools are usually built on elevated structures, such as hillsides or rooftops. This is done in order to create the illusion that the water extends to the horizon. Regular pools are not usually built on elevated structures.
- Infinity pools often have a more naturalistic look, as they mimic the appearance of a river or lake. Regular pools typically have a more traditional rectangular shape.
- The water in an infinity pool is circulated using a pump and filtration system. The water in a regular pool is also circulated using a pump and filtration system.
- Infinity pools are typically more expensive to build than regular pools. This is due to the fact that they require specialized engineering and construction techniques.
- Infinity pools are more difficult to maintain than regular pools. This is because the water level must be carefully monitored and the pool must be cleaned regularly to prevent algae growth.
- Infinity pools can be dangerous if not designed and built properly. It is important to make sure that the pool is constructed according to code and that there is a safe way to enter and exit the pool.
How do infinity pools work?
As we mentioned earlier, infinity pools don’t have a defined edge. Instead, they use a special type of filtration system that allows for recirculation of the water. This helps to keep the water clean and prevents evaporation.
The recirculation system is made up of a few key components:
- A drain located at the lowest point of the pool
- A pump that pulls the water from the pool and pushes it through the filter
- A filter that cleans the water
- A return line that sends the filtered water back into the pool
In order for an infinity pool to work properly, these components must be sized and installed correctly. If not, you may end up with problems like cloudy water or excessive evaporation.
Now that you know the difference between infinity pools and regular pools, you can decide which type is right for you. If you’re looking for a unique swimming experience that will make you feel like you’re floating on air, then an infinity pool is the way to go. Just be sure to hire a qualified contractor who can properly install the recirculation system.